Do not touch the receiver before the outdoor data is received (this may take several minutes) or the outdoor sensor learning mode will be terminated. After this the receiver will make an initial measurement and start to register the transmitter (the radio reception icon will be turned on). Wait for 1 minute and then reinsert the batteries/AC adaptor making sure to put the batteries in the receiver last to force a proper resync. If you have a solar assisted transmitter press and hold the Reset button on the underside of the unit with the solar panel in for 4 seconds then release. Reset the transmitter and then the receiver by removing the batteries/AC adaptor from both. Also avoid rechargeable batteries as many are 1.2V (need standard 1.5V) and they also leak their peak charge quickly even if they are 1.5V. Alkaline batteries slow down and freeze in colder temperatures which leads to signal dropouts so we recommend Lithium batteries in colder climates. The batteries in both units are fresh and fully charged. To troubleshoot double check the following: Your weather station is rated at 100m line of sight (no interference, barriers or walls) but typically you will get 20-40m maximum under most real-world installations, which includes passing through barriers or walls.
Wireless communication is susceptible to interference, distance, walls and metal barriers. Unable To Set WeatherSleuth To NZ Daylight Savings Time The Server Light on my WeatherSleuth Is Not Going On and Data Is Not Sending to Weather Undergroundġ6. The SET Button on my WS1173 Appears to be Faultyġ5. Changing the Logging Interval on my WS3083/WS2083/WS1093 Consoleġ4. Console Keeps Freezing or Disconecting When Connected to a PC With the USB Cableġ3. How Do I Connect the Aercus Instruments WeatherRanger to PC/Mac to Download the Data?ġ2. Temperature Differences Between Indoor and Outdoor Sensorsġ1. Not Receiving Some or All Outdoor Readingsħ. If you require an ELECTRONIC COPY OF A MANUAL you will find it by clicking here.ġ. Below is a list of the most common issues and fixes for Aercus Instruments weather stations.
0 kommentar(er)
